Z-Series Signature Set™ - Loaded Pickguard

180506 Z Loaded Guard.png
180506 Z Loaded Guard.png

Z-Series Signature Set™ - Loaded Pickguard

455.00
Quantity:
Add To Cart

In This Set

  • Bridge: Z-Series Juicy Bucker™ (ZJH4)
  • Middle: Z-Series Fat Single 5 (ZSMF)
  • Neck: Z-Core Throaty Bucker™ (ZTM4) 

Description

The Original Legacy Series Signature Set is one of our most popular because it’s a versatile “jack of all trades” set designed to do it all. The Z-Series potted versions of these same pickups give you all of the versatility and performance at a more accessible price point. With the Signature Set you get great humbucker tones in the neck and middle, as well as the standard Silent Split™ option that gives very usable single coil tones in the neck and middle as well. Choose the Signature Set if versatility is important to you and if great humbucker tones are your first priority. The Signature Set comes standard with our Fat Single in the middle, but a range of middle pickup options are possible.

This set utilizes 1 500 k audio taper push/pull pot as a volume and split switch for the bridge pickup, 1 500k audio taper push/pull pot as a master tone and split switch for the neck pickup and 1 250 k linear taper no load pot as a neck/bridge blend. Push/pull pots are wired with split up. Other control and wiring options are available by special order. Pricing may vary.

Legacy Series equivalent: Signature Set

Assembly Information

  • Loaded pickguards are fully wired with pickups, controls, 5-way switch and capacitor along with pickguard, knobs and switch tip of your choice.
  • Select colors for covers, pickguards, knobs and switch tip at checkout.
  • If you wish to use your own pickguard, knobs and switch tip and have us pre-wire the pickups and controls only (mounted on a cardboard template), order an "assembled set" here.
  • We use the "modern" 11 hole pickguard pattern. Other hole patterns are available by special order. Pricing may vary.
  • We configure our loaded pickguards with our best wiring and control recommendation. Other control and wiring options are available by special order. Pricing may vary.
  • For Assembled and Loaded Pickguard Bucker sets (wired to controls), the default is to wire the switch(es) so that the split is on when the push/pull is up, normal mode down. If you wish to have it wired split down, please let us know by email.
  • The default for push/pull pots is the CTS push/pull. If you'd prefer to substitute push/push, let us know by email.

Please note: