Z-Series Convertible Set™ - Loaded Pickguard

180506 Z Loaded Guard.png
180506 Z Loaded Guard.png

Z-Series Convertible Set™ - Loaded Pickguard

449.00
Quantity:
Add To Cart

In This Set

  • Bridge: Z-Series Convertible for Bridge™ (ZCH4)
  • Middle: Z-Core Vintage 5 (ZVN5)
  • Neck: Z-Series Convertible for Neck (ZCM4)

* Note, the default for push pots is CTS Push/pull.  If you want the push/push let us know by email

Description

The Original Legacy Series Convertible Set is another versatile “jack of all trades” set designed to do it all. The Z-Series potted versions of these same pickups give you all of the versatility and performance at a more accessible price point. With the Convertible Set you get great single-coil tones in the neck and middle in Silent Split mode, and a powerful AlNiCo on steroids tone in series mode. Choose the Convertible Set if versatility is important to you and if great single coil tones are your first priority. 

This set utilizes 1 250 k audio taper push/pull pot as a volume and split switch for the bridge pickup, 1 500 k audio taper push/pull pot as a blend and split switch for the neck pickup and 1 250 k audio taper no load pot as a master tone. Push/pull pots are wired with split mode down. Other control and wiring options are available by special order. Pricing may vary.

Legacy Series equivalent: Convertible Set

Assembly Information

  • Loaded pickguards are fully wired with pickups, controls, 5-way switch and capacitor along with pickguard, knobs and switch tip of your choice.
  • Select colors for covers, pickguards, knobs and switch tip at checkout.
  • If you wish to use your own pickguard, knobs and switch tip and have us pre-wire the pickups and controls only (mounted on a cardboard template), order an "assembled set" here.
  • We use the "modern" 11 hole pickguard pattern. Other hole patterns are available by special order. Pricing may vary.
  • We configure our loaded pickguards with our best wiring and control recommendation. Other control and wiring options are available by special order. Pricing may vary.
  • For Assembled and Loaded Pickguard Convertible sets (wired to controls), the default is to wire the switch(es) so that the split is on when the push/pull is down, series mode up. If you wish to have it wired split up, please let us know by email.
  • The default for push/pull pots is the CTS push/pull. If you'd prefer to substitute push/push, let us know by email.

Please note: