Z-Core 5 Vintage Staggered Set™ - Loaded Pickguard

180506 Z Loaded Guard.png
180506 Z Loaded Guard.png

Z-Core 5 Vintage Staggered Set™ - Loaded Pickguard

350.00
Quantity:
Add To Cart

In This Set

  • Bridge: Z-Core Vintage Hot 5™ (ZVH5)
  • Middle: Z-Core Vintage 5™ (ZVN5)
  • Neck: Z-Core Underwound 5™ (ZVU5)

Description

Another way to set it up is to set the neck output, then have the middle one notch up and the bridge one notch up from that. This is an approach that some find to be more balanced. As above, this is an obvious way to group our Vintage Output models, but there are two more output levels available in this configuration from the Custom Shop.

This set utilizes 2 standard 250 k audio taper pots, with a dedicated tone knob on the bridge pickup and a 250 k no load audio taper pot wired as the neck and middle tone.Other control and wiring options are available by special order. Pricing may vary.

Check out the Loaded Pickguard Gallery.

Assembly Information

  • Loaded pickguards are fully wired with pickups, controls, 5-way switch and capacitor along with pickguard, knobs and switch tip of your choice.
  • Select colors for covers, pickguards, knobs and switch tip at checkout.  
  • If you wish to use your own pickguard, knobs and switch tip and have us pre-wire the pickups and controls only (mounted on a cardboard template), order an "assembled set" here.
  • We use the "modern" 11 hole pickguard pattern. Other hole patterns are available by special order. Pricing may vary.
  • We configure our loaded pickguards with our best wiring and control recommendation. Other control and wiring options are available by special order. Pricing may vary.

Please note: