Store: Zexcoil® Pickup Sets for Strat®
International shipping has been significantly affected by the pandemic. Please review the International Shipping page.
Hybrid Convertible 5 Set™ - Loaded Pickguard
Hybrid Convertible 5 Set™ - Loaded Pickguard
In This Set
- Bridge: The Convertible for Bridge™ (BCH4) 
- Middle: Vintage Single 5™ (SV5) 
- Neck: Vintage Single 5 Overwound™ (SV5O) 
Description
The Hybrid Convertible 5 Set combines the great split tone and powerful, clear normal tone of our Convertible with the versatile Strat® tones of our Texas 5 Set™. Combined with a push pot to actuate the Silent Split™ and a blender pot for fantastic neck/bridge tones, you have a set with go to single coil and a unique humbucker tone in the bridge.
This set utilizes 1 500 k audio taper push/pull pot as a volume and split switch for the bridge pickup, 1 250 k no load audio taper pot as a dedicated bridge tone and 1 500 k audio taper no load pot wired as a neck and middle tone. The push/pull pot is wired with the split down. Other control and wiring options are available by special order. Pricing may vary.
Z-Series Equivalent: Z-Series Hybrid Convertible Set™
Check out the Loaded Pickguard Gallery.
Assembly Information
One Split
- Loaded pickguards are fully wired with pickups, controls, 5-way switch and capacitor along with pickguard, knobs and switch tip of your choice. 
- Select colors for covers, pickguards, knobs and switch tip at checkout. 
- If you wish to use your own pickguard, knobs and switch tip and have us pre-wire the pickups and controls only (mounted on a cardboard template), order an "assembled set" here. 
- We use the "modern" 11 hole pickguard pattern. Other hole patterns are available by special order. Pricing may vary. 
- We configure our loaded pickguards with our best wiring and control recommendation. Other control and wiring options are available by special order. Pricing may vary. 
- For Assembled and Loaded Pickguard Convertible sets (wired to controls), the default is to wire the switch(es) so that the split is on when the push/pull is down, series mode up. If you wish to have it wired split up, please let us know by email. 
- The default for Push pots is the CTS push/pull. If you'd prefer to substitute push/push, let us know by email. 
Please Note
- Pickups may take 10-15 days before ready for shipment. 
- We have limited availability of left handed parts. Please contact us for left-handed loaded pickguards and assembled sets. 
- USPS First Class International Postage is not available for orders over $400 USD. Only USPS Priority International or Priority Express International are available over $400 USD. 
