Z-Series Hybrid Juicy Set™ - Loaded Pickguard

180506 Z Loaded Guard.png
180506 Z Loaded Guard.png

Z-Series Hybrid Juicy Set™ - Loaded Pickguard

394.00
Quantity:
Add To Cart

In This Set

  • Bridge: Z-Series Juicy Bucker™ (ZJH4)
  • Middle: Z-Core Modern 5™ (ZMD5)
  • Neck: : Z-Core Modern 5™ (ZMD5)

Description

The Hybrid Juicy Set combines the great humbucker tone of our original Juicy Bucker in the bridge with the high output Strat tones of our Z-Core Modern 5 in the neck and middle. Combined with a push pot to actuate the Silent Split and a blender pot for fantastic neck/bridge tones, you have a set that can really do it all with go to single coil and humbucker tones.

This set utilizes 1 500 k audio taper push/pull pot as a volume and split switch for the bridge pickup, 1 500k no load audio taper pot as a master tone and 1 250 k linear taper no load pot as a neck/bridge blend. The push/pull pot is wired with split mode up. Other control and wiring options are available by special order. Pricing may vary.

Legacy Series equivalent: Hybrid Juicy 5 Set

Check out the Loaded Pickguard Gallery.

Assembly Information

  • Loaded pickguards are fully wired with pickups, controls, 5-way switch and capacitor along with pickguard, knobs and switch tip of your choice.
  • Select colors for covers, pickguards, knobs and switch tip at checkout.
  • If you wish to use your own pickguard, knobs and switch tip and have us pre-wire the pickups and controls only (mounted on a cardboard template), order an "assembled set" here.
  • We use the "modern" 11 hole pickguard pattern. Other hole patterns are available by special order. Pricing may vary.
  • We configure our loaded pickguards with our best wiring and control recommendation. Other control and wiring options are available by special order. Pricing may vary.
  • For Assembled and Loaded Pickguard Bucker sets (wired to controls), the default is to wire the switch(es) so that the split is on when the push/pull is up, normal mode down. If you wish to have it wired split down, please let us know by email.
  • The default for push/pull pots is the CTS push/pull. If you'd prefer to substitute push/push, let us know by email.

Please note: