TriBucker HSH with a Kit
TriBucker HSH with a Kit
The choice is yours. Select any of our 4 TriBucker models for the bridge and neck and a Z-Core 5 for the middle and craft a set to meet your tonal holy grail. And don’t forget the 3 position on/off mini toggle switch to access our recommended switching. This may be selected in the drop down box when ordering the pickup(s).
The Zexcoil Dual Core™ platform is the newest addition to our arsenal of pickups. Dual Core pickups consist of two independent pickups, or “Cores”, side-by-side under a conventionally sized humbucker cover. The Zexcoil TriBucker™ is the first pickup we have conjured from our Dual Core platform.
Core 1 is targeted at an underwound vintage level single coil output (the single Cores especially in the Dual Core platform tend to run a little hotter than their numbers suggest). Core 2 is targeted at a low wind PAF level output. All TriBuckers are engineered to be compatible with 500 k pots.
We recommend a Z-Core 5 Vintage (ZVN5) in the middle position for the best balance with a 1/3 or 1/4 TriBucker pair in split mode. With a 2 in the bridge or for more of a 50s feel, a Z-Core 5 Vintage Underwound (ZVU5) in the middle is an option. For more oomph and fatter, juicier quack, higher Z-Core 5 output levels can certainly work. It’s all a matter of taste and preference anyway, so there are no hard rules.
Recommended Controls Kits
Kit #2: (2) CTS 500k audio taper pots, (1) 250k Bourns no load blend pot
Kit #2A: (1) CTS 500k audio taper pot, (1) 500k no load tone pot, (1) 250k Bourns no load blend pot
Kit #10: (2) CTS 250k audio taper pot, (1) Bourns 250k no load blend pot
Kit #10A: (1) CTS 250k audio taper pot, (1) CTS 250k no load audio taper pot, (1) Bourns 250k no load blend pot
TriBucker HSH Set
The choice is yours. Select any of our 4 TriBucker models for the bridge and neck and a Z-Core 5 for the middle and craft a set to meet your tonal holy grail. And don’t forget the 3 position on/off mini toggle switch to access our recommended switching. This may be selected in the drop down box when ordering the pickup(s).
The Zexcoil Dual Core™ platform is the newest addition to our arsenal of pickups. Dual Core pickups consist of two independent pickups, or “Cores”, side-by-side under a conventionally sized humbucker cover. The Zexcoil TriBucker™ is the first pickup we have conjured from our Dual Core platform.
Core 1 is targeted at an underwound vintage level single coil output (the single Cores especially in the Dual Core platform tend to run a little hotter than their numbers suggest). Core 2 is targeted at a low wind PAF level output. All TriBuckers are engineered to be compatible with 500 k pots.
We recommend a Z-Core 5 Vintage (ZVN5) in the middle position for the best balance with a 1/3 or 1/4 TriBucker pair in split mode. With a 2 in the bridge or for more of a 50s feel, a Z-Core 5 Vintage Underwound (ZVU5) in the middle is an option. For more oomph and fatter, juicier quack, higher Z-Core 5 output levels can certainly work. It’s all a matter of taste and preference anyway, so there are no hard rules.
We recommend a 3 position on/off mini toggle switch to access our recommended switching. This may be selected in the drop down box when ordering the pickup(s).
Please note:
Pickups may take 10-15 days before ready for shipment.
TriBucker pickups have their covers potted on. Removal will void the warranty.
Left-handed "Z-Core" pickups are only available from the Custom Shop. If you want this feature for a set, here is an option to add to your order. Only necessary for Z-Core pickups.